Boiler Water Sample Cooler, Stainless Steel , 2,500 psi

DESCRIPTION

Don't risk spending thousands fixing your equipment. Install this boiler sample cooler, to make sure the water analysis has no interference from cooling water in your old sample cooler.  This Boiler Water Sample Cooler is the best method to obtain a sample of the boiler's water, for analysis. As you probably know, the water coming from the boiler is  very hot, and it needs to cool down so it can be analyzed ( check this article out!)

This Boiler Water Sample Cooler is easy to install.

The inner coil uses 316 stainless steel and is one-piece

construction.

Removable coil samples coolers are also available.

Made in the USA.

SPECIFICATIONS

Shell:  316 SS

End caps:  316 SS

¼” NPT adapters: 316 Stainless Steel

Coil: Continuous coil of type 316 stainless steel

Max coil pressure: 2500 psi

Max shell pressure: 250 psi

Overall length: 13 5/8”

Diameter of shell: 3 ½”

Mounting: 3” pipe clamp

Cooling water fittings: Inlet & outlet, 3/8” NPT steel (female)

Weight: 13 lbs.